LowMesh Device Flasher

Flash your LowMesh devices with the latest Meshtastic firmware using UF2 file uploads.

1
Select Device
2
Select Firmware
3
Download UF2

Step 1: Select Your Device

Step 2: Select Firmware

Firmware Details

Step 3: Download UF2 File

Pocket-S Solar Node - v2.6.11

File size: 1.30 MB

🚀 UF2 Flashing Instructions

Follow these steps to flash your LowMesh device:

  1. Put your device in bootloader mode:
    • Pocket-S/Pocket-M: Double-tap the reset button or hold the boot button while connecting USB
    • Your device will appear as a USB drive named “RPI-RP2” or similar
  2. Download the UF2 firmware file using the button above
  3. Drag and drop the .uf2 file to the USB drive
  4. The device will automatically restart with the new firmware
  5. Monitor the device LED for flashing status

💡 Pro Tips:

  • Make sure your device has sufficient battery or is connected to power
  • Don't disconnect the USB cable during flashing
  • If flashing fails, try entering bootloader mode again
  • The device will automatically exit bootloader mode after successful flashing